A very versatile freeride ski with a length of 110 mm under the boot and a rocker in the tip, it is designed both for powder and on ski slopes. However, you will enjoy this ski the most in big mountains where there is a mix of powder snow, which is in some spots blown out to the ice level, and icy crusts, but they will also easily handle the firn snow in spring.
How they ride:
“A perfect big mountain ski! The ski has a rocker only in the tip, while the tail is a classic non-twin-tip
design and, therefore, the ski has a better grip and is thus able to provide the skier with big support.
Thus, it works perfectly not only in powder, but also in slushy spring snow, on wind-blown planes or on
a chopped-up ski slope.“
Weight and mounting point for optional mounting of the binding
(measured from the heel):
179 cm +/- 1530 g; 80,0 cm
189 cm +/- 1620 g; 84,0 cm
Grinding:
87° from side
0,5° from the bottom
To produce these skis is used quality structured polyamide topsheet from the largest European supplier ISOSPORT.
In these skis are used two biaxial prepreg carrier layer and the stiffener. A prepreg is a cloth that
is already completely saturated by the manufacturer. The material is more expensive, but this is the way
to eliminate errors in the saturation of the fabric.
We use a woodcore Paulownia.
On the sidewall, we use ABS material with guaranteed quality from Europe's largest manufacturer ISOSPORT.
This is not the damping while driving but damping the differences in expansion of the material, it ensure that material hold together. As a damping, we use anti-vibration rubber tape with a thickness of 0.2 mm.
On these skis we use quality steel edges, about hardness 40 ° HRC.
In these skis is used a quality sintered racing base from the largest European manufacturer ISOSPORT.