FIS JR GS - FIS JUNIOR RACE GS
- specifications
- construction
- video
- inquiry
The FIS JUNIOR RACE GS is a junior GS race ski. This dynamic, fast and accurate ski is targeted mainly at excellent skiers and racers. The FJR GS is suitable for medium and long turns. The design of the ski predetermines it for excellent performances on race tracks.
How they ride:
“These junior GS race skis from Lusti are awesome both for free skiing and for clearing the gates.
They are calm and do not tremble at higher speeds, but they are still aggressive and fast, no matter the
surface...simply awesome.” (Bára Roubalová (), FJR GS 170 cm)
Grinding:
87° from side
0,5° from the bottom
Mounting point for optional mounting of the binding
(measured from the heel):
140 cm – 59,0 cm
150 cm – 64,0 cm
160 cm – 68,0 cm
170 cm – 73,0 cm
175 cm – 74,0 cm
To produce these skis is used quality smooth polyamide topsheet from the largest European supplier ISOSPORT.
In these skis are used two biaxial prepreg carrier layer. A prepreg is a cloth that is already completely saturated by the manufacturer. The material is more expensive, but this is the way to eliminate errors in the saturation of the fabric.
Titanal is high quality carrier layer, that is used in the manufacture of skis. This layer significantly improves longitudinal and torsional rigidity. In these skis are used two sheet of titanal.
We use a woodcore - unidirectional spruce plywood.
On the sidewall, we use ABS material with guaranteed quality from Europe's largest manufacturer ISOSPORT.
This is not the damping while driving but damping the differences in expansion of the material, it ensure that material hold together. As a damping, we use anti-vibration rubber tape with a thickness of 0.2 mm.
On these skis we use quality steel edges, about hardness 48 ° HRC.
In these skis is used a quality sintered racing base from the largest European manufacturer ISOSPORT.
