The FIS JUNIOR RACE SL is a junior slalom race ski. This dynamic and agile ski is targeted mainly at excellent skiers and racers. The FJR SL is suitable for short and medium turns. The design of these skis predetermines them for excellent performances on race tracks.
How they ride:
“Lusti’s junior slalom race skis ride literally like greased lightning. They dart out from each turn
so quickly that a cloud of powder will rise behind you. They will support you on any surface. In short...if
you want to carve nicely short turns, then buy these slalom race skis from Lusti.” (Bára Roubalová
() FJR SL 145 cm)
Grinding:
87° from side
0,5° from the bottom
Mounting point for optional mounting of the binding
(measured from the heel):
130 cm – 56,0 cm
135 cm – 58,5 cm
140 cm – 61,0 cm
145 cm – 63,5 cm
150 cm – 66,0 cm
To produce these skis is used quality smooth polyamide topsheet from the largest European supplier ISOSPORT.
In these skis are used two biaxial prepreg carrier layer. A prepreg is a cloth that is already completely saturated by the manufacturer. The material is more expensive, but this is the way to eliminate errors in the saturation of the fabric.
Titanal is high quality carrier layer, that is used in the manufacture of skis. This layer significantly improves longitudinal and torsional rigidity. In these skis are used two sheet of titanal.
We use a woodcore - unidirectional spruce plywood.
On the sidewall, we use ABS material with guaranteed quality from Europe's largest manufacturer ISOSPORT.
This is not the damping while driving but damping the differences in expansion of the material, it ensure that material hold together. As a damping, we use anti-vibration rubber tape with a thickness of 0.2 mm.
On these skis we use quality steel edges, about hardness 48 ° HRC.
In these skis is used a quality sintered racing base from the largest European manufacturer ISOSPORT.