JRC - JUNIOR RACE CARVER
- specifications
- construction
- video
- inquiry
A carving ski for kids. The skis are designed for a wide range of little skiers – from beginners to advanced skiers. The ski is fit for edged turns, but it can also handle skidding.
Compared to the JT skis, these skis boast a quality sintered race base.
The binding VIST junior 4.5 is suitable for the boot size of 184 - 275 mm and for the weight of up
to 45 kg.
The binding VIST junior 7.5 is suitable for the boot size of 244 - 335 mm and for the weight of up
to 75 kg.
Grinding:
87° from side
0,5° from the bottom
Mounting point for optional mounting of the binding
(measured from the heel):
100 cm – 42,5 cm
110 cm – 47,0 cm
120 cm – 51,5 cm
130 cm – 56,5 cm
140 cm – 61,0 cm
To produce these skis is used quality structured polyamide topsheet from the largest European supplier ISOSPORT.
In these skis are used two biaxial prepreg carrier layer and the stiffener. A prepreg is a cloth that is already completely saturated by the manufacturer. The material is more expensive, but this is the way to eliminate errors in the saturation of the fabric.
We use a woodcore - unidirectional spruce plywood.
This is not the damping while driving but damping the differences in expansion of the material, it ensure that material hold together. As a damping, we use anti-vibration rubber tape with a thickness of 0.2 mm.
On these skis we use quality steel edges, about hardness 48 ° HRC.
In these skis is used a quality sintered racing base from the largest European manufacturer ISOSPORT.
