cs en ru

PC 74 - PERFORMANCE CARVING 74

The price is dependent on the length of skis and type of bindings.
arc:
short
long
terrain
ice
Powder
Carvindex
on the edge
skid
Sportindex
race
Relax
  • specifications
  • construction
  • video
  • inquiry

A typical downhill crossover with a width of 74 mm under the boot. Although this ski is not too wide, it can successfully cope even with mushy snow and will make the user happy especially at medium and higher speeds.

This obedient and agile high-performance ski allows to easily initiate a turn and then calmly proceed through the turn on the edge. The PC 74 is simply a sporty ski suitable for all-day use, for rides at medium speeds and for medium edged turns.

How they ride:
“The ski is very solid, it felt incredibly stable and thanks to its longer radius, I enjoyed making turns across the entire ski slope. Wherever I looked, the ski would go. Thanks to its two Titanal sheets, the ski is very dynamic and even with a longer radius it’s definitely not lazy.” (Radka Luštincová (1990), PC 74 171 cm)

Grinding:
87° from side
0,5° from the bottom

Mounting point for optional mounting of the binding
(measured from the heel):

164 cm – 69,0 cm
171 cm – 72,0 cm
178 cm – 75,5 cm
185 cm – 78,5 cm

Topsheet

To produce these skis is used quality structured polyamide topsheet from the largest European supplier ISOSPORT.

Lamination layer

In these skis are used one biaxial and one triaxial prepreg carrier layer. A prepreg is a cloth that is already completely saturated by the manufacturer. The material is more expensive, but this is the way to eliminate errors in the saturation of the fabric.

Titanium

Titanal is high quality carrier layer, that is used in the manufacture of skis. This layer significantly improves longitudinal and torsional rigidity. In these skis are used two sheet of titanal.

Core

We use a woodcore - unidirectional spruce plywood.

Sidewall

On the sidewall, we use ABS material with guaranteed quality from Europe's largest manufacturer ISOSPORT.

Damping

This is not the damping while driving but damping the differences in expansion of the material, it ensure that material hold together. As a damping, we use anti-vibration rubber tape with a thickness of 0.2 mm.

Edges

On these skis we use quality steel edges, about hardness 48 ° HRC.

Base

In these skis is used a quality sintered racing base from the largest European manufacturer ISOSPORT.

Celá konstrukce
about our company  
Galus Industries Ltd. is a czech manufacturer of skis, snowboards and other sports equipment. Since 2000, our company began to produce a small quantity for the Czech Market of high performance racing skis under the brand LUSTi. The intention has always been to offer the highest quality at the best price. In the company is also the development of summer products such as longboards, wakeboards and kiteboards.

Dealership