cs en ru


The price is dependent on the length of skis and type of bindings.
on the edge
  • specifications
  • construction
  • video
  • inquiry

A friendly, relaxing sporty ski for all-day skiing.

In terms of design, the SC 74 is similar to the PC 74, but it doesn’t contain any Titanal. Removing the Titanal sheets has resulted in a ski of the same dimensions and proportions, with a very similar hardness, but with a more pleasant behaviour, making it fit for a very wide range of skiers.

Although the SC 74 does not require so much physical effort, it is very accurate, stable and obedient. This versatile ski can handle any speed, whether the ride is based on skidded or carved turns and whether one rides on a groomed slope or through soft terrain after a night’s snowfall – simply a great all-around ski.

How they ride:
“The SC 74 is a Titanal-free version of the PC 74. I have tried out both skis and while both have almost the same stiffness, they behave differently. As opposed to the PC 74, which is the more aggressive version, the SC 74 is very calm and relaxing during the ride. I had no problem to ride this ski all day long, without getting significantly tired. The skis are very versatile, they allow you to make both cleanly carved turns, tolerating a few skids here or there, and skidded turns.” (Radka Luštincová (1990), SC 74 164 cm)

87° from side
0,5° from the bottom

Mounting point for optional mounting of the binding
(measured from the heel):
157 cm – 66,0 cm
164 cm – 69,0 cm
171 cm – 72,0 cm
178 cm – 75,5 cm


To produce these skis is used quality structured polyamide topsheet from the largest European supplier ISOSPORT.

Lamination layer

In these skis are used two biaxial and one triaxial prepreg carrier layer and the stiffener. A prepreg is a cloth that is already completely saturated by the manufacturer. The material is more expensive, but this is the way to eliminate errors in the saturation of the fabric.


We use a woodcore - unidirectional spruce plywood.


On the sidewall, we use ABS material with guaranteed quality from Europe's largest manufacturer ISOSPORT.


This is not the damping while driving but damping the differences in expansion of the material, it ensure that material hold together. As a damping, we use anti-vibration rubber tape with a thickness of 0.2 mm.


On these skis we use quality steel edges, about hardness 48 ° HRC.


In these skis is used a quality sintered racing base from the largest European manufacturer ISOSPORT.

Celá konstrukce
about our company  
Galus Industries Ltd. is a czech manufacturer of skis, snowboards and other sports equipment. Since 2000, our company began to produce a small quantity for the Czech Market of high performance racing skis under the brand LUSTi. The intention has always been to offer the highest quality at the best price. In the company is also the development of summer products such as longboards, wakeboards and kiteboards.