cs en ru


The price is dependent on the length of skis and type of bindings.
on the edge
  • specifications
  • construction
  • video
  • inquiry

A friendly, relaxing, sporty ski for all-day skiing. Compared to the SC 74, the SC 77 is wider and therefore it is more capable of handling poorer downhill conditions. Also ideal for chopped powder in the afternoons.

In terms of design, the SC 77 is similar to the PC 77, but it doesn’t contain any Titanal. Removing the Titanal sheets has resulted in a ski of the same dimensions and proportions, with a very similar hardness, but with a more pleasant behaviour, making it fit for a very wide range of skiers.

While the SC 77 does not require so much physical effort, it’s still very accurate, stable and obedient. This versatile ski can handle any speed, whether the ride is based on skidded or carved turns and whether one rides on a groomed slope or through soft terrain after a night’s snowfall – simply a great all-around ski.

How they ride: 
“For a direct comparison, I tested the SC 77 skis on the same day as their Titanal version PC 77, I switched between them several times and while at first I didn’t spot any remarkably big difference, on the afternoon chopped up slope I discovered that the SC 77 was notably calmer than its Titanal version PC 77, it wasn’t so aggressive, and the ride was more relaxing and less physically demanding. To me, a distinctive feature of this ski was its great willingness to turn – basically wherever I looked, the ski would instantly go.” (Milan Luštinec (1966), SC 77 170 cm)

87° from side
0,5° from the bottom

Mounting point for optional mounting of the binding
(measured from the heel):

156 cm – 66,5 cm
163 cm – 69,5 cm
170 cm – 72,5 cm
177 cm – 75,5 cm


To produce these skis is used quality structured polyamide topsheet from the largest European supplier ISOSPORT.

Lamination layer

In these skis are used two biaxial and one triaxial prepreg carrier layer and the stiffener. A prepreg is a cloth that is already completely saturated by the manufacturer. The material is more expensive, but this is the way to eliminate errors in the saturation of the fabric.


We use a woodcore - unidirectional spruce plywood.


On the sidewall, we use ABS material with guaranteed quality from Europe's largest manufacturer ISOSPORT.


This is not the damping while driving but damping the differences in expansion of the material, it ensure that material hold together. As a damping, we use anti-vibration rubber tape with a thickness of 0.2 mm.


On these skis we use quality steel edges, about hardness 48 ° HRC.


In these skis is used a quality sintered racing base from the largest European manufacturer ISOSPORT.

Celá konstrukce
about our company  
Galus Industries Ltd. is a czech manufacturer of skis, snowboards and other sports equipment. Since 2000, our company began to produce a small quantity for the Czech Market of high performance racing skis under the brand LUSTi. The intention has always been to offer the highest quality at the best price. In the company is also the development of summer products such as longboards, wakeboards and kiteboards.