TOUR 82
- specifications
- construction
- video
- inquiry
The skis TOUR 82 are primarily designed for tourism and for subsequent sharper downhill rides. They provide the user with amazing freedom of off-piste movement. When riding in deep snow, the skis will take you up to the surface and thus enable a smooth downhill ride even in deep snow, but they also allow for making shorter turns and solid manoeuvrability both on a harder surface and on a groomed piste. With these skis you can set off to high mountains and treat yourself with difficult and fast downhill rides.
Grinding:
87° from side
0,5° from the bottom
Weight and mounting point for optional mounting of the binding
(measured from the heel):
160 cm +/- 1290 g; 66,0 cm
170 cm +/- 1390 g; 71,0 cm
180 cm +/- 1490 g; 76,0 cm
To produce these skis is used quality structured polyamide topsheet from the largest European supplier ISOSPORT.
In these skis are used two biaxial prepreg carrier layer and the stiffener. A prepreg is a cloth that is already completely saturated by the manufacturer. The material is more expensive, but this is the way to eliminate errors in the saturation of the fabric.
We use a woodcore Paulownia.
This is not the damping while driving but damping the differences in expansion of the material, it ensure that material hold together. As a damping, we use anti-vibration rubber tape with a thickness of 0.2 mm.
On these skis we use quality steel edges, about hardness 48 ° HRC.
In these skis is used a quality sintered racing base from the largest European manufacturer ISOSPORT.
