Thanks to its design and parameters, this versatile ski is suitable for all types of snow. The composition and hardness of the wooden core is the same as for the skis of the CWR 84 category with two Titanal sheets. In addition, this ski has a small rocker (reverse camber) in the tip, which makes it easier to initiate a turn.
How they ride:
“During the ride, the ski is rather calm, it’s definitely not a beast. Riding these skis is very relaxing and thanks to a width of 87 mm under the binding, nothing could surprise you on the ski slope. You can ride in a very stable fashion and without hesitation even on a chopped up piste.” (Radka Luštincová (1990), CWR 87 172 cm)
Mounting point for optional mounting of the binding
(measured from the heel):
166 cm – 69,0 cm
172 cm – 71,5 cm
178 cm – 74,0 cm
184 cm – 77,0 cm
87° from side
0,5° from the bottom
To produce these skis is used quality structured polyamide topsheet from the largest European supplier ISOSPORT.
In these skis are used two biaxial and one triaxial prepreg carrier layer. A prepreg is a cloth that is already completely saturated by the manufacturer. The material is more expensive, but this is the way to eliminate errors in the saturation of the fabric.
Titanal is high quality carrier layer, that is used in the manufacture of skis. This layer significantly improves longitudinal and torsional rigidity. In these skis is used one sheet of titanal.
We use a woodcore - unidirectional spruce plywood.
On the sidewall, we use ABS material with guaranteed quality from Europe's largest manufacturer ISOSPORT.
This is not the damping while driving but damping the differences in expansion of the material, it ensure that material hold together. As a damping, we use anti-vibration rubber tape with a thickness of 0.2 mm.
On these skis we use quality steel edges, about hardness 48 ° HRC.
In these skis is used a quality sintered racing base from the largest European manufacturer ISOSPORT.